====== IMD Insulation Monitor ======
{{ downloads:hardware:photos:evp_imd.png?nolink&400|}}

The IMD is an insulation monitoring device for use with high voltage battery packs/systems. It monitors the insulation resistance to ground from both the positive and negative DC terminals, and will alert the BMS and connected systems if there is any fault detected. 

==== Features ====
  * Monitors insulation resistance to chassis ground
  * 4 Temperature sensor inputs
  * 4 Relay outputs
  * 2kV Working Isolation
  * 5kV Withstand Isolation
  * CAN communication
  * 12V supply or 24V Optional

==== Specifications ====
  * Supply Voltage: 12V/24V
  * Dimensions: 
  * Connector: Molex Minifit Jnr 20-Way, JST JWPF 6-Way, JST XH 5-way
  * Weight: 
  * Connectivity: 2x CANBus 250-1000kbps

==== Documentation & Downloads ====
  * {{downloads:hardware:wiringsheets:imd:evpdwg0348_-_im2000001_insualtion_monitor_wiring_r2.pdf |Wiring Guide}}
  * {{downloads:hardware:manuals:imd:imd_quick_start_guide.pdf | Quick Start Guide (Coming Soon)}}
  * {{downloads:hardware:manuals:imd:imd_quick_manual.pdf| Operating Guide(Coming Soon)}}
  * {{downloads:hardware:can_specs:imd:imd.sym| CAN Specification(Coming Soon)}}
  * {{downloads:hardware:firmware:imd:imd_latest.hex| Latest Firmware (Coming Soon)}}


==== Safety Notes ====
When using and/or installing any BMS is it essential to observe all relevant safety precautions around working with live electrical connections. Please seek professional training when working with live cells and/or high voltage batteries. See our [[guides:electrical_safety_guide|Electrical Saftey Guide]] for some basics.