This is an old revision of the document!
IMD Insulation Monitor
The IMD is an insulation monitoring device for use with high voltage battery packs/systems. It monitors the insulation resistance to ground from both the positive and negative DC terminals, and will alert the BMS and connected systems if there is any fault detected.
Features
- Monitors insulation resistance to chassis ground
- 4 Temperature sensor inputs
- 4 Relay outputs
- 2kV Working Isolation
- 5kV Withstand Isolation
- CAN communication
- 12V supply or 24V Optional
Specifications
- Supply Voltage: 12V/24V
- Dimensions:
- Connector: Molex Minifit Jnr 20-Way, JST JWPF 6-Way, JST XH 5-way
- Weight:
- Connectivity: 2x CANBus 250-1000kbps
Documentation & Downloads
Safety Notes
When using and/or installing any BMS is it essential to observe all relevant safety precautions around working with live electrical connections. Please seek professional training when working with live cells and/or high voltage batteries. See our Electrical Saftey Guide for some basics.